Runout Probe

RUNOUT PROBE is a safe and reliable measurement of axial and radial runout using a smart probe

Runout of machine shafts can be due to worn bearings/ bearing clearance, a bent shaft or a damaged surface. Runout on the coupling directly impacts on the machine parts and results in worn bearings and production stops. The Fixturlaser Runout Probe is an accessory for Fixturlaser NXA and the hardware in the probe is equipped with Bluetooth that connects with the Fixturlaser NXA.

Runout Probe can be used for:

  • Axial and radial runout checks on flanges
  • Checking movements on machine feet (soft foot)
  • Liftcheck
  • Checking movements due to pipe strain
  • Thermal growth on machine casings
  • Eccentric or skewed mounting of coupling hubs
  • Checking bore shaft

  Sensor Display ROP          MaxMin ROP

  • LVDT- Probe (Linear variable differential transformer)
  • Battery operated (Rechargeable Li-Ion)
  • Wireless communication
  • 5 mm measuring range
  • IP65 protection class
  • Magnetic mounting

Runout Probe is a LVDT sensor with ± 2,5 mm measurement range with high precision (within 0.001 mm). The measuring sensor and battery assembly are enclosed and have a sealing class of IP65 which will withstand coolant and oil. The built-in battery is charged using a USB micro connector and has an operating time of 11 hours. The enclosure for the battery box contains built-in magnets that allow the device to be easily attached to the measuring stand. [sic Fixturlaser]