Blog

admin1
13 March 2015
Always be sure you have a solid, rigid and clean foundation prior to the alignment process. Check for potential defects on the foundation or machine frame that could...
+
gestion
13 March 2015
A lot of people still believe that they cannot use their laser alignment system when they are confronted to a non-rotating application, well they are mistaken. For more...
+
gestion
13 March 2015
Do not forget that when mounting your heads on the shaft, if there is a lack of space, the heads can also be mounted onto the coupling given that it is the fixed part of...
+
gestion
13 March 2015
Are you making more corrections than expected? This may be a consequence of incorrect dimensions input in your system. It is crucial to take the distances with the most...
+
admin1
13 March 2015
One of the most overlook step while performing an alignment is the verification of the ‘E’ distance, better known as the coupling gap (between the movable and stationary...
+
admin1
13 March 2015
One of the biggest challenge in mills causing headache and loss of time during laser alignment procedure is still coupling backlash. Certain type of couplings are designed...
+

Pages